Tag: materials

Marble And Granite

These days, products from such natural precious stones such as marble and granite are a real luxury, affordable luxury, and finish of these raw materials is a symbol of good taste and a guarantee of quality and durability. Granite and Marble: decorative, strength, durability, combined the three main advantages, which you can appreciate this noble raw materials, which due to its practicality and versatility allows use it as a decoration for the inside of the premises and to create elegant facades. Floor, lined with marble slabs is the ideal smooth surface for a chic living room in the house, a luxurious bathroom, kitchen or an ideal easily washable cover for the office. The walls, decorated with natural stone, will breathe purity and freedom, will create a special energy in the room, and original works of marble and granite complement the overall picture even greater luxury. Marble used in antiquity as a structural and architectural cladding material because its plastic and decorative merits (hardness and fineness makes marble pliant in the processing, capable of taking polished, whereby the detected tonal richness of marble and the beauty of his uniform, spotted or a layered structure). Pattern and image depend not only on the structure marble, but also on the ways in which you are sawing stone. Color and pattern of marble occur after the surface will be brought to a perfect smoothness, more precisely after polishing. Beautiful items made of marble – Tables, counter tops, fireplaces – a luxury and a gift for decorating your surroundings.

Marble, though needs careful care and protection from negative external factors, to care for him is not too difficult. Quite regularly clean surface and apply multiple blunt "hardener", and polishing will make it a miracle materials clearly reflect the rays of light. There are many masterpieces in marble. For example, one of the undisputed gems of the collection British Museum, the famous Parthenon marbles, otherwise known as Elgin marbles, marble frieze of the Parthenon tape and so on, these masterpieces is not a simple story, they tried to steal and destroy, but has survived some of these masterpieces of ancient Greece. Granite is one of the most durable and commonly used building materials. Granite is very resistant, so it is often used to create a massive dense tables, columns, for finishing stairs, etc.

In addition to being perfectly amenable to polishing granite, nowadays also frequently made use billed facing elements of an anti-slip shoes, just for finishing the stairs, and other areas of high terrain. Already studied all of its unique quality, reliability and practicality, leading engineers and architects continue to actively use the valuable granite in their projects. Surely you've noticed for example, when you come to the museum, as is sometimes breathtaking from the king around the atmosphere, as all around well-thought out, some luxury antique trophies stand around. For example, in the galleries you can witness the magnificent granite and marble exhibits a century ago, countertops, fireplaces, they are so elegant survived until our times, and the most remarkable is that nothing prevents us to order exactly the same products or similar, or advanced copies. Granite and marble in our disposal and to this day, and when something is your thing, after many many years, may also be standing in some museum, and everyone will .S by granite and You can decorate the elegant marble bathroom, living room, hallway or accent certain parts of the room: stairs, fireplace, windowsill, or even purchase some unique items, items made of marble and granite: countertop, sink, column.

Ventilated Facades

Ventilated facades, lined with ceramic granite, self-cleaning in windy weather. Craig Jelinek may not feel the same. Bearing wall that usually does not require any special training to install on it ventilated structures. In addition, there is no need to put on the wall plaster. Add to your understanding with Andi Potamkin. The restoration of old buildings for which typical movement of moisture from the inside out, the use of ventilated facades eliminates the need for plaster. Ventilated facades can be easily repaired, quickly and simply replacing the slab.

Thanks pre-planned placement of sutures are many excellent opportunities for decoration. Possibility of facade work at any time of year. Ventilated fronts are durable and do not need service, which significantly reduces the budget for maintenance of the building. From the foregoing it is clear that ventilated facades are contemporary designs that can be used for both new and reconstructed buildings. The main elements of design podoblitsovochnoy design consists of brackets that attach directly to the wall, and bearing profiles, forming a skeletal system, with special fastener elements mounted plate (sheet) tiles.

1. Brackets Brackets are one of the key elements to ensure reliable fastening products to the carrier base. Mounts brackets to the wall provide a special anchoring elements. Type dyupeley and screws, anchors, their diameter, the depth setting is selected, depending on the pulling loads and wall material, which set this fastener. Brackets can form the required distance between the wall and facing material that allows the use of insulation required thickness. Brackets shall be withstand both static and dynamic loads, and provide the ability to install Half-timbered houses on uneven grounds.

Modern Insulation

Isover – a glass wool of the highest quality, produced from recycled glass, ash, sand and limestone. Filed under: Sonny Perdue. He is a fibrous insulating material. Beautiful insulating ability isover based on a static air which, in turn, closed fiber, and its thermal conductivity is incomparably small. Cheniere Energy partners often says this. Due to the unique structure consisting of glass wool, provided the same excellent sound absorption. Sam insulation withstand for many years and even decades of operation, the strain can not be fully retains its insulating properties. Technical characteristics, isover divided into types: isover kl – used in framework structures, with insulation of roofs, different types of floors, as well as in air-conditioned buildings. The material in the package is compressed 2 times of its original volume, thereby improving its transportation and storage.

isover KL-E – also used in thermal insulation of walls and roofs of structures inside the premises, various kinds of floors, as well as in general-insulation of buildings. isover KL-A – is aimed at isolating the types of surfaces which, during operation does not have heavy loads, the application is not limited to various designs of intermediate floors and walls. Isover kl-a successfully established itself as an excellent insulation of floors of all types. isover KT-40 – Twin used in particular for insulating horizontal and inclined elements of all types of buildings (vaulted ceilings, floors and all sorts of overlap), when required, the weight of insulating elements was minimal. Sam isover kt 40-Twin contained in a special package that significantly improves its transportation and storage. After unpacking it completely recovers its original shape and original dimensions. Isover KT-11 is used in constructions where the insulation placed in a specially prepared by lathing, thanks to which it is not exposed to stress.

Technology For Manufacturing Metal Doors

For the manufacture of metal doors used a simple, enhanced, or a special type of design. The first thing to make a box, where the standard type of construction of a metal door, use shaped tubes 50h25 mm. From inside the box welded "battens in the form of a square 10×10 mm. Made of profiles 40h25 mm grating, a box of leaf, an integral part of which – the edge rigidity. Lock secured in a metal pocket, and its frame is made of the same profile as the carton leaf. Most often used in metal doors and two locks for their efforts from the outside weld metal plate of 2 mm. The result is that the castle is located within 4 mm of metal. The next stage of manufacturing of metal door hinge is welded to the profiles of the door frame and interlocks.

Bollards are located between the loops at a distance of 50 – 100 mm above the bottom and at the same distance below the top. Then welded to the outer sheet metal, fabric on each side of which more than 10 mm (to hide the gap between door leaf and door frame). Special notches in the loop by being made to lie flat sheet metal. After welding the casing to the three sides of the box, the door is ready for assembly and painting. On request customer in the metal door drill a hole under the eye or slotted holes for bolts of the gates and locks. The final stage of manufacture of metal doors – its finish.

If you finish using imitation leather, fabric superimposed on wooden beams, which may drive a decorative nails, and locked all the hardboard sheet with its inner side. If you use another type of finish metal door, then bars do not need, and instead of hardboard can be used mdf, laminate or plastic. If used in the finishing decorative panels, they are glued to the door leaf with special glue, and finish with imitation leather, First foam or batting is superimposed on the canvas, and only after that imitation leather stretched on a door leaf. Edge in this glued and then nailed to the studs before nasverlennye holes. Assembly metal doors with imitation leather trim in some cases, be longer – a process with more time consuming than using a plastic finish, mdf or laminate.